Audison AP8.9 bit 8 channel DSP processor amplifier Technical Specification Distortion – THD (1kHz @ 4Ohms, 90% Power): 0.05 %Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz – 22KHzS/N ratio…

Audison AP8.9 bit

8 channel DSP processor amplifier

Technical Specification

Distortion – THD (1kHz @ 4Ohms, 90% Power): 0.05 %
Bandwidth (-3 dB, 2 V RMS, 4Ohms): 10Hz – 22KHz
S/N ratio @ A weighted, 1V, Max Power: 95 dBA
Damping factor @ 1 kHz, 2 V RMS, 4Ohms): >70
Input sensitivity: 2 – 15 V RMS
Input impedance: 15KOhms
LOAD IMPEDANCE (MIN):
8 Ch: 2Ohms
4 Ch – Bridge (1-2) (3-4) (5-6) (7-8): 4Ohms
OUTPUT POWER (RMS) @ 12.0 – 14.4 VDC, 1% THD:
8 Ch @ 4Ohms: 35 W x 8
8 Ch @ 2Ohms: 65 W x 8
4 Ch – (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ohms: 130 W x 4
OUTPUT POWER (RMS) @ 14.4 VDC, 10% THD:
8 Ch @ 4Ohms: 45 W x 8
8 Ch @ 2Ohms: 85 W x 8
4 Ch – (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ohms: 170 W x 4

DIGITAL SIGNAL PROCESSOR
(32 bit Cirrus Logic; Clock speed: 147 MHz)
Crossover: Full / Hi Pass / Lo Pass / Band Pass
Crossover type and slope:
Linkwitz @ 12/24 dB – Butterworth @ 6/12/18/24 dB
Crossover Frequency: 68 steps @ 20Hz – 20KHz
Phase inversion: 0? / 180?
Analog Input Equalizer: Automatic De-Equalization
Output Equalizer
N.9 Parametric Equalizers: ?12 dB;10 pole; 20Hz – 20KHz
Time Alignment Distance 0 – 510 cm / 0 – 200.8 in.
Time Alignment Delay 0 – 15 ms
Time Alignment Step 0.08 ms; 2.8 cm / 1.1 in.
Time Alignment Fine Set 0.02 ms; 0.7 cm / 0.27 in.
SYSTEM SET:
Preset (Drive Preset) Rotary switch for 7 installation Presets
Acoustic Preset N.2 DSP Memory, DRC selectable